Looking for Garage Door Services in Centennial, CO?

Call us today for your free estimate

Whether it’s residential garage doors or commercial garage doors, Blue Sky will get the job done right at a fair price.

Get A Free quote

Serving the greater Denver, CO Area

When it comes to garage door services, you want a team you can rely on. That’s where Blue Sky Garage Doors comes into play.

Priding ourselves on customer satisfaction and building a reputation for our commitment to quality and integrity.

Located in the greater Denver area, Blue Sky Garage Doors looks forward to tackling your next project!

Centennial is a home rule municipality located in Arapahoe County, Colorado, United States. The city population was 108,418 at the 2020 United States Census, making Centennial the 11th most populous municipality in Colorado. Centennial is a part of the Denver–Aurora–Lakewood, CO Metropolitan Statistical Area and the Front Range Urban Corridor.

Centennial was formed on February 7, 2001, from portions of unincorporated Arapahoe County, including the former Castlewood and Southglenn census-designated places (CDPs). The citizens of the area had voted to incorporate on September 12, 2000, choosing Centennial as the official name during the vote. The name reflects Colorado's admission to the Union as the 38th state in 1876, the centennial year of the United States Declaration of Independence. The state of Colorado is nicknamed the "Centennial State".

Incorporation was approved by 77% of the voters, and the population of the area at over 100,000 made it the largest incorporation in U.S. history as of its creation. The city was incorporated in large part to prevent further annexations of unincorporated areas by the city of Greenwood Village in an attempt to improve its tax base. The taxes generated from businesses in unincorporated portions of Arapahoe County funded the majority of the county's services, including road work. A number of court cases^[specify] eventually established the right of incorporation to take precedence over the right of annexation.

The city was incorporated on a promise to keep city taxes at 1%. (One of the campaigns against incorporation appealed to voters to maintain the 3.8% sales tax of the unincorporated county.) According to the Centennial website, the current sales tax rate is two-and-a-half times the promised rate, at 2.5%.

Since the city is relatively new, some people in the Denver-Aurora metropolitan area do not yet recognize the area by the name "Centennial", especially since neighboring Aurora, Englewood and Littleton are the default place names assigned by the United States Postal Service for ZIP codes serving Centennial. Thus, mailing addresses designated as "Aurora", "Englewood" or "Littleton" may actually be located in Centennial. This causes considerable confusion, as Centennial and Englewood do not even share a boundary, while some portions of Centennial are surrounded by Aurora and vice versa.

In 2008, Centennial voters approved a referendum by approximately a 2-to-1 margin making Centennial a home rule city.

Centennial Airport, formerly Arapahoe County Airport, lies adjacent to Centennial, but is located in unincorporated Arapahoe County. The airport is not named after the city, as it predates the city by over 30 years.

Centennial is roughly divided in half by Interstate 25, with most of its business and entertainment centers lying west of the highway. The city's boundaries are highly irregular and evocative of a gerrymander, particularly the overwhelmingly residential eastern portions of the city, which appear with Foxfield, portions of Aurora, and unincorporated areas as a distorted checkerboard on the city's map.

Centennial has many hills, gullies and ravines, and its open spaces are usually accompanied by recreational trails and parks, including Dry Creek Dam, DeKoevend Park, the High line Canal Trail, Willow Creek Trail, as well as Big Dry Creek and Little Dry Creek Trails. Centennial hosts most native wildlife and is a good reflection of Colorado's front range ecosystem. Centennial has seen a boost in coyote populations in recent years, leading to resident education on how to deter coyotes from eating family pets.

Centennial is located at 39°35'47" North, 104°50'38" West (39.5963, −104.8439).

At the 2020 United States Census, the city had a total area of 19,115 acres (77.355 km) including 94 acres (0.379 km²) of water.

The city is approximately composed of 87.4% White, 4.8% Hispanic or Latino, 3.6% Asian, 2.4% African American, 0.4% Native American, and 0.3% from other races.

The median age is 37.2 years, in comparison to the 35.3-year national average. For every 100 females, there are 98 males.

National CineMedia and United Launch Alliance are among the companies based in Centennial. Blackjack Pizza was headquartered in Centennial.

According to Centennial's 2017 Comprehensive Annual Financial Report, the top employers in the city are:

Most of Centennial is within the territory of the Cherry Creek Public Schools while the western portion of the city in the territory of Littleton Public Schools. Centennial is also served by a few private schools.

Private Elementary and Middle Schools

Seminary

The city is governed under the council-manager form of government which limits the power of the city to levy and collect taxes. The city council has eight members. The Mayor and Council Members are all part-time officials who hold other full-time jobs.

Notable individuals who were born in or have lived in Centennial include:

Services Near Me

Commercial Garage Door Installation in Centennial, Colorado

Commercial Garage Door Installation

Commercial Garage Door Installation is a major investment for business owners, so it's essential to select the right product and install it correctly. Professionally installed commercial doors will last long, saving you money in the long run by avoiding expensive repairs and maintaining safety on your premises.

Commercial garage doors come in a wide range of shapes, sizes and materials to meet your individual requirements. Plus, they can be custom-designed to adhere to industry-specific regulations and standards, so you get exactly the right door for your facility.

Residential garage doors may only open and close a few times each day, while commercial doors must be opened and closed multiple times daily - sometimes more frequently if your business requires regular delivery of supplies and products. That is why regular inspections and maintenance of your commercial garage door should be a top priority.

Types of Commercial Garage Doors

The traditional overhead style is the most common commercial garage door, which hangs over an opening or storefront. These steel garage doors provide sturdy construction that can withstand repeated use. Plus, they're easy to clean and maintain - especially beneficial if your business has high foot traffic.

Another popular choice is a commercial sectional door. These are similar to residential overhead garage doors in that they're constructed of wide steel sections, but commercial sectional doors also have an integrated track that stores away when not in use.

These doors are an ideal choice for businesses that need quick access to the outside, like restaurants and retail shops. Not only do they let in natural light and improve air flow in the room, but also feature insulation which helps save energy and cooling costs.

Are you a small, medium or large business owner seeking to upgrade the security and safety of your building? Get in touch for a free estimate on commercial garage door installation. Our team of experts will assist you select the ideal door for your space, ensure it meets all requirements and budget, then install it quickly and securely.

When installing a commercial garage door, the amount of time it takes depends on both the type of door needed and the existing condition of your garage. If the existing door is in good condition, replacement should take no more than several hours by an experienced company. However, if it needs replacing due to damage or age, work may become more complex and take more time.

Costs for Commercial Garage Door Installation

The price of a new commercial garage door depends on several factors, such as its design and material. A basic model with no windows or insulation may cost as little as $500 while higher-end models come at much higher costs. Furthermore, whether or not you wish to add extra features like windows and insulation will affect the final cost.

Door Panel Repair in Centennial, Colorado

Garage Door Panel Repair - How to Fix a Dent

Panels form the mainstay of your garage door, keeping it safe and secure while adding to its aesthetic appeal.

Garage doors come in a range of materials, such as wood. Depending on the style and material of your door, you may have several options for repairing or replacing its panels.

1. DIY: Do It Yourself

If you are experienced working with tools and can perform minor repairs on your own, fixing a damaged garage door panel may not be too difficult for you. However, be mindful of safety precautions and make sure all necessary tools are available.

2. If you don't know how to tackle it yourself, contact a professional who can take care of the task for you.

3. Repairing a Dent: When It's Possible

When your garage door panel has been dented, it may be more cost-effective and easier to repair the affected area than replace the entire panel. Dents can be caused by hailstones or other storm debris, physical objects like balls that get kicked into the door, or even just from impact from cars.

4. If you don't have access to a hammer or other tool, heating the dent may be enough to straighten it out in its upright position.

5. Metal doors with dent can be repaired using adhesive.

6. If your wooden door is older, you may need to replace the entire panel.

7. If the dent is minor, you can use aluminum foil to apply heat to it and restore its original look. This will help straighten out the area and restore your car's paint job back to new.

8. If the dent is extensive, you can hire a company to repair it for you.

9. The most frequent cause of garage door denting is accidental impact from a vehicle.

Denting in your panel can be both frustrating and irritating. It could also lead to other issues, such as the door buckling or damaging other components of the interior.

It can be challenging to tell whether your panel is actually broken or just showing signs of wear and tear, so take the time to inspect it regularly.

Once you determine how severely damaged a panel is, it's essential to get it repaired promptly in order to avoid further harm and extend the lifespan of your garage door.

Once you know how much it needs replacing, begin searching for a replacement panel that matches your garage door's size and shape. Aesthetics are usually top of mind when selecting a new garage door, so finding one that matches what you currently have can be an advantageous move.

Panel replacement costs can range anywhere from $200 to $800, so it's essential that you consider the total cost when making your decision. Include labor, setup and mobilization fees as well as any extra charges associated with hiring a general contractor to oversee the project.

Opener Installation in Centennial, Colorado

The garage door opener is one of the most important parts of a garage door system. If it's not installed correctly, it can cause damage to other components and make your garage door more difficult to open and close.

How to Properly Install a Garage Door Opener

When buying an opener, choose the right type for your home — whether it's a belt-drive, chain-drive, or electric opener. The type of opener you choose should be based on the size of your garage and the style of the door it will be opening, as well as your budget.

1. Consider a Pro Installation

For heavy doors or those with tall, steep sides, it's best to hire a professional for opener installation. They'll be able to install the opener in a safe, fast, and efficient manner.

2. Check Your Spring and Rollers

It's a good idea to have a professional check out your current opener before installing a new one. They'll be able to diagnose any issues and ensure that your door is working properly.

If your door doesn't open as easily or loudly as it should, start by checking for broken or wobbly rollers and brackets. Also, check the torsion spring (mounted on the header above the door opening) for breaks in the coils. If you find a spring that is broken, replace it as soon as possible, or else your garage door may stop working completely.

3. Adjust Your Opening Force

If you have a manual opener, take a look at the instructions to see where the opening force adjustment screws are located. If the screw isn't in its proper position, turn it just a little to the left or right until you have the force you want.

4. Check Your Safety Systems

If your opener has a safety reverse system or an electric eye, it's important to make sure they're functioning properly. It's recommended to check them every month and readjust them if necessary.

5. Change Your Wires

If the wires that run from your opener to the photo eyes and the wall button are exposed, you should replace them with new ones. These wires have probably been in your garage for a long time and they're likely to be nicked or worn. It only takes about 15 minutes to run a new wire, but it's worth the cost and inconvenience to prevent damage to your garage door.

6. Test Your Remote Control

If you have a remote opener, test it to see if the button works. If it's not working, call a technician for repair or replacement.

7. Test Your Garage Door

Once you've had your new garage door opener installed, it's a good idea to test it out by opening and closing it manually. If you notice a significant amount of resistance when the door is opened, it could be caused by your finger getting caught in the track.

If you have any questions about your garage door or opener, don't hesitate to contact us at AAA Garage Door Inc. We'll help you get your door and opener in top working condition again.

Opener Repair in Centennial, Colorado

If your garage door opener isn't opening all the way, making strange noises or not working at all, you need to have it repaired immediately. Having your opener repaired can save you money, ensure safe operation and increase the lifespan of the machine.

Garage Door Opener Repair Symptoms

If the door won't open all the way or make a loud noise, it's likely an issue with your motor or chain drive. We'll repair the motor or chain drive to restore function so you can use your garage door opener again with ease.

Usually this is an easy fix and can be done by anyone with basic DIY skills.

The most common cause of a broken garage door opener is a bad main gear drive. This is the plastic gear that comes in direct contact with the worm drive on your motor. If your garage door opener makes a grinding noise but the door won't move, it's probably time for this component to be replaced.

This is a bit more complicated than the other repairs in this article but still fairly simple to do by yourself.

Besides repairing the main drive gear, you can also fix the trolley carriage and the rail that attaches to it. You'll need to remove your opener's header bracket and disconnect the trolley from the motor and then slide off the old one and replace it with a new one.

Another simple and affordable repair to make is to replace the weather stripping around your garage door. This helps to seal the gap between your garage floor and the door, which can prevent your opener from slipping off its track.

You should have your door inspected at least once a year to make sure it's in good condition. It's also a good idea to have it serviced by a professional to ensure there are no problems with the tracks, rollers or springs that will cause damage to your door or opener.

A broken garage door opener can be dangerous. The opener's motor hoists a heavy door up and down the tracks multiple times a day, so it can exert an incredible amount of stress on the parts.

This can damage the tracks, causing them to bend or break. It can also make the door difficult to open and close.

Other possible signs that your opener needs to be repaired include a faulty keypad, remote control or wall control panel, damaged safety eyes, and a malfunctioning logic board. Having these components fixed or replaced by your Precision Garage Door Technician will help restore functionality and ensure your opener continues to operate safely.

Regardless of the type of garage door opener you have, Precision is always prepared to perform any necessary garage door opener repairs and maintenance. We have the tools and skills to provide quick and efficient service for a variety of brands, including LiftMaster, Wayne Dalton, Chamberlain, Genie, Stanley and more.

Residential Garage Door Installation in Centennial, Colorado

Residential Garage Door Installation is a home improvement project that can add value to your property and make your life easier. A new garage door is also an important safety feature for your home, so be sure to invest in the latest technology.

Residential Garage Door Installation

Before deciding to install a new garage door, it's crucial to consider several factors: type of door, size and weather conditions. These will influence the time and labor costs for your project.

The most common types of garage doors include single panel, sectional and swing-out/sliding. Each type of door has its own unique features and benefits.

Single Panel

Composed of a single panel, a single-panel door is the least expensive to install. They're typically priced from $400 to $1,000, but can vary greatly depending on the style and manufacturer.

Swing-out/Sliding

A swing-out or sliding door is a more common type of garage door and usually includes a curved section that can be opened like a regular door. They can be as costly as $1,000 to $2,000, but can add significant visual appeal to your home.

Sectional

A sectional garage door is a popular choice and is the most commonly installed door in the United States. Each section of the door is connected with hinges that bend over a curved track. This allows the door to sit parallel to the ceiling when fully open and in line with the walls when completely closed.

Attach the upper and lower tracks to the wall with 5/16" x 1-1/2" lags. Ensure the upper and lower sections are parallel with the flag bracket at the top of the track. Next, secure the end bearing plate to the horizontal section with one 3/8" bolt. When tight, the flange should be even with the flag bracket and pointing away from the door.

BOTTOM SECTION

To complete the bottom section, first attach the hinges with 2 lags per stile, even with the bottom corner of the door section. Then, slip the looped cable ends onto their studs on the bottom fixtures. Once that's done, lag the rollers on each of the stiles with two lags, leaving an extra 1/2" at each end.

Winding the Springs

To wind up the springs, insert a bar into the hole on the casting and crank it out and up until you feel the cast end begin to move inward toward the shaft. Then, turn down the set screws until they contact the shaft, then 1-1/2 to 2 turns more.

When you're finished, tighten the set screws until they're snug. This will give you a good idea of how well the springs are tensioned.

If you're installing a spring-tensioned door, be sure to use the right size springs. The stronger the springs, the more force they'll require to open and close the door. Using the correct springs will save you money over time and help your door last longer.

Spring Repair in Centennial, Colorado

Garage Door Spring Repair Basics

Garage door springs are a major part of the operation of your garage doors. They extend and contract with the help of cables and pulleys to open and close the garage door. Unfortunately, they sometimes break, causing your garage door to either open or close improperly. If this happens, you can fix a broken spring yourself or call a professional. But before you start, it’s important to understand how they work and why they might need repair.

Torsion Springs

Torsion springs are used in most garage doors. They are mounted on the wall above the garage and extend or collapse with the help of cables and pulleys attached to the horizontal tracks that run through the ceiling of the garage. A damaged or broken torsion spring can cause the door to open or close erratically or not at all.

Depending on the size of your garage, you may have one or two torsion springs. If you have a single torsion spring, it will be attached directly to the door, while if you have a double torsion spring, it will be connected to the cable and pulleys in the track.

It’s a good idea to replace torsion springs as soon as they are damaged or break, and that includes the ones that are closest to the motor. If you do not, you could end up putting unnecessary stress on the motor and damaging it.

If you’re inexperienced with spring repairs, it’s a good idea to hire a professional. They have the proper tools and training to complete the job safely.

Compression Springs

Coil springs, which are found on many vehicles, work in conjunction with shocks and struts to maintain suspension movement. They absorb shock and force, allowing the truck to smoothly shift over bumps and dips on the road.

These springs are not only essential in a vehicle’s suspension, but they also help to prevent the wheels from rubbing together. If a coil spring is damaged or worn, it will not be able to do its job effectively, and your vehicle’s suspension will fail.

To keep your coil springs in tip-top condition, it’s a good idea to spray them with a silicone-based lubricant three or four times per year. This will keep them from rusting, which can significantly shorten their lifespans.

You should replace your coil springs in pairs—for example, both front coil springs—to ensure the entire car rides evenly. This will allow your vehicle to run at its best.

If you don’t know what type of spring your garage door requires, it’s a good idea to ask the professionals at White’s Automotive Center. They will be able to provide you with the right replacement springs for your specific model of door.

There are three common types of extension springs: open-looped, double-looped and clipped. Each has its own strengths and weaknesses, so it’s important to choose the right one for your needs. You can purchase replacement springs from your local hardware store or through a manufacturer. However, it is more cost-effective to buy them from a company that specializes in garage door springs. They will have them in stock and can easily answer your questions.

24 Hour Emergency Repair in Centennial, Colorado

When your garage door stops working, it can be an emergency that requires prompt assistance. If your business relies on many people navigating through the doors or you have a large warehouse with commercial roll up garage doors, having your doors down while waiting for a technician is unaffordable.

24 Hour Emergency Garage Door Repair

Garage door repair may be necessary for several reasons: you don't have access to your opener, the door is off track, or there are broken springs or gears preventing it from closing properly. If these issues go uncorrected, they could cause significant damage to both the door and other parts of your home.

When your garage door has a broken spring, gear, or motor, always call an expert for repair. Not only will this save you money on repair costs, but it also ensures your home remains safe and secure.

It is recommended to hire a professional for any repairs, especially those involving hazardous tools or materials. An improperly completed repair could prove disastrous and even lead to injury.

Avoid the need for 24-Hour Emergency Garage Door Repair by regularly maintaining your garage door and consulting with a professional for an inspection. Doing this will prevent minor problems from becoming major ones.

Have you ever opened the garage door and noticed it sagging slightly? This could be an indication that it needs fixing soon. For best results, have a professional inspect the balance of your garage door for any potential issues. You can test its balance by disconnecting the opener and manually opening it halfway to see if it stays in place.

Unbalanced springs can be a major safety risk, as they put undue strain on other components of the door. To ensure no injuries occur, have this issue professionally examined right away.

Repairing your garage door can be a stressful experience, but the peace of mind you will have once the work is done will be worth it. Make sure to find a local garage door company that provides 24-hour emergency service.

They can assist with all repairs and replace any broken parts if required. They could even install a new garage door if required.

A damaged garage door panel should be addressed promptly, as it poses serious threats to your safety and security. Not only does it let in pests and rodents, but it also allows heat or cooling to escape.

Fixing garage door issues usually begins with disconnecting the electric motor from its opener and trolley. Do this by attaching an emergency release cord that will disconnect the trolley, allowing you to open and close your garage door manually. At least once annually, have a technician come out to your home or business for this task.